Description
The Clamp Stowage Plate (part number RK-11) gives the operator a fixed place to attach the grounding clamp when the STS 300 Ground Monitoring System is not in use. Stowing the clamp on the plate eliminates the possibility of stowing it in a way that impacts its function, and keeps it from being damaged by being left on the ground.
Compatible clamps
The stowage plate accepts the K78160A, K78160ASRS, REB-IP and GAT-IP clamps.
Installation
The plate mounts to the STS 300 enclosure using existing enclosure bolts. Installation hardware is included. From the STS installation instructions:
- Remove the contents from the kit bag.
- Remove the two bottom or side center bolts on the enclosure.
- Place the stowage plate over the cover and align the two mounting holes.
- Add the two 5/16 in flat washers (supplied) and replace the bolts.
- Tighten the bolts to 11 ft-lb. Do not overtighten.
See the stowage plate installation card (PDF) for illustrations.
Specifications
| Part number | RK-11 |
| Fits | STS 300 Ground Monitoring System (single point) |
| Material | UV resistant and chemical resistant plastic |
| Hardware | Installation hardware included |
| Weight | 1 lb |
| Dimensions | 6.5 x 4.5 x 0.5 in |
Compatible products
- STS 300 Ground Monitoring System
- Multipoint Clamp Stowage Plate (RK-16) for the STS 300 Multipoint
- K78160A Clamp, K78160ASRS Clamp, REB Clamp
FAQ
Do I need to drill the enclosure?
No. The plate uses the existing enclosure bolts, with two supplied flat washers.
I have an STS 300 Multipoint. Which plate do I need?
Use the Multipoint Clamp Stowage Plate, part number RK-16.
Not sure which part fits your unit? Request a quote with your STS 300 model number and STS will confirm the part.
